The CONNEX spring bush is a plain bearing that can be used in harsh environmental conditions, in bearings subjected to heavy loads, and in components that rotate slowly or pivot. Although similar to a solid bearing, it has one major difference: the innovative CONNEX toothed slot, which is especially advantageous during assembly in particular.
|
Properties |
Type E, Form 1 |
Type E, Form 3 |
Type E, Form 4 |
|---|---|---|---|
|
Finish on inner Ø |
rolled |
finely turned |
finely turned |
|
Finish on outer Ø |
rolled |
rolled |
ground |
|
Housing bore tolerance |
H8 |
H8 |
H6 |
|
Inner Ø tolerance after installation |
H11 |
H10 |
H9 |
|
Seating capacity |
|
|
|
|
Precision |
|
|
|
|
Wear resistance |
|
|
|
|
Bearing surface roughness |
N8; Ra 3.2mm |
N7; Ra 1.6mm |
N7; Ra 1.6mm |
| Grease grooves/holes | Yes | Yes | Yes |
|
Outer Ø |
14 - 110 mm |
14 - 140 mm |
14 - 140 mm |
CONNEX spring bushes tailored to your specifications.
Can't find the right solution in our standard range? Then make the most of our comprehensive expertise, experience and the wide range of options we offer, and have us create CONNEX spring bushes that are perfectly tailored to your needs. We would be happy to help – do not hesitate to get in touch.
For example...
- grease grooves, external feed channels, grease holes (e.g. lubricant supply)
- with collar (e.g. for fixing in place under axial loading)
- with inner contours (e.g. to prevent edge pressure)
- cone
- special tolerances
- intermediate sizes
- coatings (e.g. wear reduction, corrosion protection, emergency running properties)